Deploy & Operate
Production Guide
Go-live checklist
- Confirm playback works on the target machine (and audio if required).
- Confirm the control network and remote control from a second device.
- Confirm the debug panel is hidden after a normal production start.
- Verify the explicit launch command and control sequence used by the show.
- Enable auto-start on boot (Watchdog; Raspberry Pi when applicable).
- Verify firewall rules and security (whitelist vs unrestricted).
- Optionally create a diagnostic package baseline after a clean run.
- Choose standalone vs managed to match your show-control topology.
Reliability configuration
For unattended deployments, configure these reliability features:
| Feature | Mechanism | Documentation |
|---|---|---|
| Playback after restart | Controller sends an explicit playback command, or this launch uses --open-file | Playback after restart |
| Health monitoring | GET /api/health | Health API |
| Screenshots | GET /api/screenshot/low.png / high.png | Diagnostics |
Previous / Next
- Previous: Exhibition Kiosk
- Next: Control Network